Oce VarioPrint 6000 Plus Line Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 102

background image

Clean the OPC belt (right)

Open the doors

Introduction

This procedure is only intended for key operators who received the special maintenance training.

When to do

When a pollution is visible at exact the same height on an A4 print or a letter print after each 6 to
8 prints.

Or when a pollution is visible on a print that is larger than the paper size of the bulk media used.
The pollution is visible on the operator side or the back side of a print (Z direction).

Before you begin

Make sure that you have the Cleaner J, the cleaning gloves and the offset pads at hand.

Required tools

Service key (supplied with the machine)

Socket wrench 10 (supplied with the machine)

Cleaning gloves (supplied with the machine)

Procedure

1.

Select the maintenance task from the list of the required and suggested maintenance tasks.
[System] view -> maintenance section -> press the [Start maintenance] button.

2.

Press [Start] to start the maintenance wizard.
At the start of the procedure, the machine is turned off.

CAUTION

Wait until the machine is turned off. Opening the doors too soon can possibly cause
injury.

3.

Use socket wrench 10 to loosen the bolt of the front doors (2).

4.

Open the lower door. Open the front doors (3).

[81] Open the front doors

Clean the OPC belt (right)

Chapter 3 - Maintenance tasks - Level 2

67

Océ VarioPrint 6000 line

«
...
65
66
67
68
69
...
»

Содержание VarioPrint 6000 Plus Line







































































































Отзывы:

Нет отзывов

Похожие инструкции для VarioPrint 6000 Plus Line

Бренд: Xerox Страницы: 108

Бренд: Oki Страницы: 32

Бренд: Oki Страницы: 2

Бренд: Oki Страницы: 96

Бренд: Oki Страницы: 2

Бренд: Oki Страницы: 78

Бренд: Oki Страницы: 2

Бренд: Oki Страницы: 2

Бренд: Oki Страницы: 32

Бренд: Oki Страницы: 52

Бренд: Oki Страницы: 49

Бренд: Oki Страницы: 48

Бренд: Oki Страницы: 161

Бренд: Oki Страницы: 6

Бренд: Oki Страницы: 84

Бренд: Oki Страницы: 51

Бренд: Oki Страницы: 86

Бренд: Oki Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды