Oce VarioPrint 6000 Plus Line, Руководство по обслуживанию

Страница: 10 / 102

Maintenance level Maintenance task Where to find more information
2 Solve paper jams in hot areas of
the printer
Remove sheets from the process
modules on page 40
Clean the OPC belts •
Clean the OPC belt (left) on
page 61
)
•
Clean the OPC belt (right) on
page 67
)
Clean the glue cleaning rollers
Clean the glue cleaning rollers on
page 73
Optional light-weight media module
To print light-weight media the optional light-weight media module must be installed. The
maintenance actions for the light-weight media module are:
• Check the filter:
Check the filter on page 92
• Replace the filter:
Replace the filter on page 93
.
• Remove the air guidance unit to access the TTF:
Remove the air guidance unit on page 95
.
• Install the air guidance unit:
Install the air guidance unit on page 97
.
Begin maintenance
The maintenance section of the [System] view shows the required or suggested maintenance
tasks. Here, you can only view the maintenance tasks.
[1] Begin maintenance
When you press the [Start maintenance] button, the actual maintenance screen appears.
The maintenance screen
After you press the [Start maintenance] button in the [System] view, the maintenance screen
appears. The maintenance screen shows the required and suggested maintenance tasks. A red
Introduction to the maintenance tasks
10 Chapter 1 - Introduction
Océ VarioPrint 6000 line