Oce VarioPrint 2050-70, Руководство по эксплуатации

Страница: 96 / 174

96 Océ VarioPrint 2050-70 Job manual
Stop or correct a print job
Introduction
A print job has the following phases (see ‘ Print jobs in this manual ’ on
page 66 ).
1
The job is stored in the mailbox on the DAC.
2
The job is printed, when you print the job on the operator panel (mailbox job).
The job is printed, when the job reaches the top of the print queue (automatic
job).
The table below shows the actions to take when you stop or correct a phase.
Note:
You can interrupt the copy process before it has finished, to start a new
job. The suspended job is continued after the new job is completed (see
‘Interrupt a print job’ on page 98).
Note:
You can delete jobs from the mailbox, to prevent that the mailbox gets full
(see ‘Control the mailbox jobs’ on page 89).
How to correct: when you make the print job settings
When Then
You notice an incorrect setting for
the mailbox job Correct the mailbox job setting.
You want to start a job, while the jobs
from the print queue are being
printed Stop the printing of the print queue.
The printed sets are incorrect and the
job is not yet completed (phase 2) Stop the printing process.
If you press the Correction key Then
Once The Océ VarioPrint 2050-70 restores
the settings, as defined in the Océ
VarioPrint 2050-70 printer driver.