Oce VarioPrint 2050-70, Руководство по эксплуатации

Страница: 58 / 174

58 Océ VarioPrint 2050-70 Job manual
Improve the image quality of a copy
Introduction
The Océ VarioPrint 2050-70 has a tested technology to detect photos, rasters
and fine lines on the originals. Do not adjust the default quality settings, unless
you require a deviating image quality.
Check and, if necessary, adjust the settings for the following originals.
■
Originals contain extensive photos.
■
Originals are mainly text.
Before you begin
■
To check your image quality setting, make a test copy before you start a
copy job with many sets.
How to copy a photo with the glass platen
1
Place and align the photo face down on the platen.
Follow the feed direction according to the dimensions of the photo.
2
Select the 'Copy' mode .
The 'Basic' section opens automatically.
3
Select '1-sided' in the 'Original' and 'Copy' function boxes.
4
Select 'No' in the 'Staple' function box.
5
Activate the 'Paper' section.
Make sure that the 'Paper input' is open.
6
Select the size and orientation of the required paper in the 'Source' function
box.
Make sure that the orientation of the paper matches the feed direction of the
photo.
Note:
When the size of the required paper does not match the dimensions of
your photo, you must adjust the enlargement or reduction (see ‘Make an
enlarged or reduced copy’ on page 50).