Oce VarioPrint 2050-70, Руководство по эксплуатации

Страница: 40 / 174

40 Océ VarioPrint 2050-70 Job manual
'Covers' Definition of the covers:
You can select a front or rear cover, for the copied sets. See
the feedback box for the result of the settings.
The 'Cover' function shows the paper tray that is used for the
covers.
'Paper input' ■
The 'Automatic' value is the default setting in the 'Source'
function box.
The value changes to 'Tray' when you select a different
size.
■
The selected size is related to the dimensions of the
originals, detected by the automatic document feeder.
You can change the size.
The platen does not detect the dimensions of the
originals, so that the default setting (A4 from tray 4) is
used, unless you can change the size.
Make sure that the orientation of the selected size
matches the feed direction of the originals.
The current 'Paper size' is displayed in the 'Paper' section.
If the orientation of the stock of paper in the tray does not
match the feed direction of the originals in the automatic
document feeder, the Océ VarioPrint 2050-70 rotates the
the image 90°.
If rotation of the image occurs, a rotation symbol
is
displayed in the 'Extra' section.
■
The 'Special feeder' value allows you to use special
material, such as an overhead sheet (see ‘
Input trays,
output bins and materials ’ on page 142 ).
When you use the special feeder, you must select the
paper size of the special material.
Additional to the standard sizes (A3, A4 and A5), you can
insert special paper sizes in the special feeder (see ‘
Copy
on special material ’ on page 53 ).
The upper icon in the 'Size' function provides several
sizes to select from.
Card Description of the functions