VarioLink 3550p Series User’s Guide> 24
To load long paper in tray 1, follow the procedure below:
1.
Pull the paper tray out to its maximum.
Note
• Pull the extendable part out to its maximum. For details
on the procedure to extend the paper tray, refer to “
Loading Paper in a Paper Tray” (P. 44).
2.
Load the paper with the side to be printed facing up. Curl up
the back end of the paper so that it will not fall from the tray.
3.
Push the paper tray completely into the printer.
Setting Custom Paper Sizes
Before printing, set the custom size on the printer driver.
You have to configure the settings on the control panel too when
loading custom size paper in trays 1 to 4 for printing. For details on
setting the control panel, refer to “ Setting Custom Paper Sizes”
(P. 47).
Important:
•
When setting the paper size on the printer driver and the
control panel, be sure to specify the same size as the actual
paper used. Setting the wrong size for printing will cause
the machine failure. This is especially true if you configure a
bigger size when using a narrow width paper.
