Oce TDS100, Руководство пользователя

Страница: 29 / 70

Use the Océ TDS100 29
Adjust leading and trailing strips
Introduction
Both originals and copies can contain a strip to file it. The Océ TDS100 allows
you to handle strips as follows.
■
Remove a strip
■
Add a strip.
You can adjust the following strips.
■
Leading strip.
A leading strip is at the beginning of the original where you feed the original
(see figure 10 on page 30).
■
Trailing strip.
A trailing strip is at the end of the original, the loosen end (see figure 11 on
page 30).
When to do
Use the strip function to do the following.
■
When you need to copy an original with a strip to a copy without a strip,
remove a strip
■
When you need to copy an original without a strip to a copy with a strip, add
a strip.
Attention:
When you remove a strip, make sure that you copied all the
required information.