Oce Eco Solvent CS9060, Руководство пользователя

Страница: 135 / 139

User’s Guide Océ CS9060 printer
Chapter 6: Troubleshooting
135 AP-75770 – Rev 1.1 -19/11/2007,
The wrong media size is set during initialization
No. Possible cause Remedy Reference
1
Are you using the
recommended media? Use the recommended media.
2
Is the media loaded at
an angle? Set the media straight.
Setting roll media
3
When the media is set,
does it curl upward? Straighten the media or set a new media.
Setting roll media
4
Is the printer used in an
environment other than
the one specified, such
as near an air
conditioner? Only use the printer in an environment that is
specified for use.
Loading roll media
5
Are you using media
that has been printed
on already? Use a new media.
Media jams frequently occur
Notes
•
If non- recommended media is used, correct media feeding cannot be assured.
No. Possible cause Remedy Reference
1
Are you using the
recommended media? Use the recommended media.
2
Is the media used in an
environment other than
the one specified? Use the media in a dedicated environment. "Cautions on
handling media"
3
Are you using old
media? Replace it with new media. " Replacing roll
media"
4
Are you using folded or
wrinkled media?
5
Does the media bend? Use the recommended media. When using media
other than the dedicated one, set the Vacuum Fan
menu. "Panel setup menu"
The media veers during printing.
No. Possible cause Remedy Reference
1
Are you using the
recommended media? Use the recommended media.
2
Is the loading position
of the media correct? Set the media correctly. Setting roll media
3
Is the roll media set
correctly? Set the roll media correctly. Loading roll media