Oce Eco Solvent CS9060, Руководство пользователя

Страница: 34 / 139

User’s Guide Océ CS9060 printer
Chapter 3 : Installing the Unit
34 AP-75770 – Rev 1.1 -19/11/2007,
3.4.1 Replacing ink Cassettes
(1) Replacement time
¾ When “[****] InkNearEnd” is displayed on the operation panel the alarm buzzer sounds continuously.
•
This message is displayed when there is a small amount of ink remaining in the ink cassette.
•
To stop the buzzer, press [ENTER].
•
Prepare the ink cassette for replacement.
¾ When “[****] InkEnd” is displayed on the operation panel.
•
This message is displayed when there is no ink remaining in the ink cassette.
•
When “[****] InkEnd” is displayed on the operation panel the alarm buzzer sounds
continuously. To stop the buzzer click the [ENTER] key.
•
Immediately replace it with the new ink cassette.
Notes
•
[****] in the messages of the ink cassette replacement indicates the colour that is almost empty or runs
out, using the following characters.
o
K: black
o
C: Cyan
o
M: Magenta
o
Y: yellow
•
Only remove and insert ink cassettes at the time of replacement. Not doing so may result in incorrect
printing behaviour due to failures such as nozzle loss, or air which might come in the ink tubes.
•
If "Ink End" appears, it is not possible to print until the new ink cassette has been inserted.
•
If there is no new ink cassette for replacement, leave the empty ink cassette into the printer. Leaving
the printer without ink cassettes inside the ink cassette slots may result in head clogging.
(2) Cassette Types
Our genuine ink cassettes that can be used for the Océ CS9060 printer are as follows.
Description Model No.
Ink cassette K (Black: 220ml) 29952249
Ink cassette C (Cyan: 220ml) 29952250
Ink cassette M (Magenta: 220ml) 29952251
Ink cassette Y (Yellow: 220ml) 29952252
Notes
•
Only use Océ original ink.
This printer has been developed for use of genuine ink cassettes. In case of using non genuine ink
cassettes, notice the following :
o
Printing might become blurred and the end of ink in the cassette might no longer be correctly
detected.
o
The problems caused by using non genuine ink cassettes will not be covered by the warranty and
repair expenses will have to be paid by the customer.
•
When the ink cassette is moved from a cold place to a warm place, keep the ink cassette unused for
three hours or more in the printing environment.