Oce Eco Solvent CS9060, Руководство пользователя

Страница: 136 / 139

User’s Guide Océ CS9060 printer
Chapter 6: Troubleshooting
136 AP-75770 – Rev 1.1 -19/11/2007,
6.3.4 Printing-related troubleshooting
Printing is partially stained or incomplete.
Notes
•
Proper print quality may not be obtained with the media other than the recommended one.
No.
Possible cause Remedy Reference
1
Does the media
include moisture? Replace it with new media. "Replacing roll media"
2
Are you using the
folded or wrinkled
media?
3
Does the media
bend? Use the recommended media. When using
media other than the dedicated one, set the
Vacuum Fan menu. " "Panel setup menu"
The printing position is incorrect (some parts of the media cannot be printed on)
No. Possible cause Remedy Reference
1
Is the loading position
of the media correct? Set the media correctly. Setting roll media
2
Did you set up the
origin and print
position? Cancel or reset the settings of the origin and print
position. "Panel setup menu"
Printing is blurred
No. Possible cause Remedy Reference
1
Are you using the
recommended
media? Use the recommended media.
2
Are you using thick
or thin media? Use the recommended media.
3
Is the media printed
on the printing
surface? Confirm the printing surface of the media and set it
correctly. Setting media
4
Did you perform an
Alignment? Perform Alignment. Adjust the print
head
5
Did you perform a
Media feed
compensation? Perform Media feed compensation. "Media feed
compensation"
6
Is each heater set to
the appropriate
temperature? Set it to the appropriate temperature. "Panel setup menu"
7
Is the head height
set to High? Return the head height to "Normal (Low)". "Head height
adjustment"