Oce CS231, Руководство по эксплуатации

Страница: 51 / 594

CS240/CS231 3-5
Before making copies 3
* Parts marked with an asterisk are internal options and therefore are not shown in the illustration.
No. Part name Description
1 Main unit The document is scanned by the scanner section, and the
scanned image is printed by the printer section.
Referred to as the "machine", the "main unit", or the "CS231"
throughout the manual.
2 Authentication unit (biometric type)
AU-101 Performs user authentication by scanning vein patterns in the fin-
ger.
For details, refer to the manual provided with the authentication
unit (biometric type).
3 Working table WT-502 Provides an area to temporarily place a document or other mate-
rials. This is also used when the authentication unit (biometric
type) is installed.
4 Fax multi line ML-501 Installed to increase the telephone lines available for faxing.
5 Large capacity unit LU-301 Can be loaded with up to 3,000 sheets of plain A4-size paper.
Can be loaded with the following A4-size paper: 2,500 sheets of
thick paper 1, 1,750 sheets of thick paper 1+, 1,CS240 sheets of
thick paper 2 or 1,300 sheets of thick paper 3.
Referred to as the "LCT" throughout the manual.
6 Finisher FS-517 Feeds out finished printed pages. The "Sort" setting (separating
by copy set), "Group" setting (separating by page), and Staple
settings ("Corner" and "2 Positions") are available.
7 Finisher FS-608 Feeds out finished printed pages. The "Sort" setting (separating
by copy set), "Group" setting (separating by page), Staple set-
tings ("Corner" and "2 Position"), "Half-Fold", "Center Staple &
Fold", and "Tri-Fold" are available.
8 Punch kit PK-512 Installed onto the Finisher FS-517/FS-608 to allow hole punching
to be used.
9 Punch kit PK-513 Installed onto the Finisher FS-517/FS-608 to allow hole punching
to be used.
10 Finisher FS-519 Feeds out finished printed pages. The "Sort" setting (separating
by copy set), "Group" setting (separating by pages) and Staple
settings ("Corner" and "2 Position") are available.
11 Output tray OT-602 Installed onto finisher FS-519 and used for separating printed
pages.
Referred to as the "optional output tray" throughout the manual.
12 Mailbin kit MT-502 Installed onto finisher FS-519 to divide printed pages (only with
computer printing) and feed them into the appropriate tray as-
signed to a specific individual or group.
Referred to as the "mailbin" throughout the manual.
13 Saddle stitcher SD-505 Installed onto finisher FS-519 so that copies can be bound or
folded at the center.
Referred to as the "saddle stitcher" throughout the manual.
14 Punch kit PK-510 Installed onto finisher FS-519 to allow hole punching to be used.
15 Output tray OT-503 Collects printed pages.
16 Fax kit FK-502* Allows this machine to be used as a fax machine.
17 Stamp unit SP-501* Applies a stamp to documents that have been scanned.
For details, refer to the User manual – Fax Operations (Option).
18 Scan accelerator kit SA-501* Creates images at high speed when sending scans.
19 Security kit SC-503* Installed to encode the data saved on the hard disk so that the
hard disk can be used more safely.
20 Local interface kit EK-602* Used for connecting the authentication unit (biometric type) and
the JScribe IC card reader/writer.