Oce CS231, Руководство по эксплуатации

Страница: 508 / 594

13 Utility mode
13-16 CS240/CS231
Power Save Settings
2
Note
[Low Power Mode Setting] appears only if the "Administrator Security Levels" parameter in
Administrator mode is set.
!
Detail
For details on the "Administrator Security Levels" parameter, refer to "Security settings" on page 13-32.
Output Settings
* CS231: If finisher FS-519 is installed, "Tray 3" is selected as the default setting.
2
Note
[Output Setting], [AE Level Adjustment] and [Blank Page Print Settings] appear only if the "Administrator
Security Levels" parameter in Administrator mode is set to "Level 2".
CS231: [Bin Assignment] only appears if the optional mailbin kit is installed.
The “Bin Assignment” parameter is set to “Tray 2” only if the optional output tray is installed.
AE Level Adjustment
Auto Paper Select for Small Original
Parameter Description Default Setting
Low Power Mode Settings Specify the desired length of time (between 10 and 240
minutes) until the machine enters Power Save mode. 15 minutes
Sleep Mode Setting Specify the desired length of time (between 15 and 240
minutes) until the machine enters Sleep mode. 30 minutes
Parameter Description Default Setting
Print/Fax Output Settings Specify settings for faxing and printing. For details, refer to the User manual – Fax Op-
erations (Option) and the User manual – Print Operations.
Output Tray Setting Select the copy output tray for each
type of job (copies, printouts, faxes
and reports). Copy: Tray 1
Print: Tray 1
Print Reports: Tray 2*
Fax: Tray 2*
Bin Assignment
(CS231) Select whether or not Tray 1 is
specified as mailbin 5 and the op-
tional output tray is specified as
mailbin 6. Not Set
Description Default Setting
Specify the initial value for auto exposure. The higher the setting, the more that the doc-
ument background is emphasized. Standard (2)
Description Default Setting
Select whether copying is permitted when the "Auto" Paper setting is selected and ei-
ther no document is placed on the original glass or the document placed on the original
glass is too small for its size to be detected.
•
Copy on Small Size:
The document size is determined to be A5, and copies are produced on A5-size pa-
per.
• Copy on A4:
The document size is determined to be A4, and copies are produced on A4-size pa-
per.
• Prohibit Copy:
Copies cannot be produced since the document size cannot be detected. Before
pressing the [Start] key, the paper tray (paper to be printed on) must be selected.
Prohibit Copy