Ø
Maintenance Schedule and Procedures
48210-A
see copyright, disclosure, use and duplication information on pg ii
2-3
POWER SWITCH
MAIN POWER INPUT
VOLTAGE SELECTOR
CLEAN/RUN SWITCH
AIR INJECTION PORT
WASTE OUTLET PORTS
INK TANKS
PRODUCT LABEL
PARALLEL
PORT
Figure 2-2. Rear view of right cover.
5. Pressure prime each ink line (Figure 2-3) until all air and solvent clears from the tube
connecting the reservoir and print head. This usually requires applying air pressure for
approximately 5 seconds. For more information on pressure priming ink lines, refer to the
Arizona 30 Sign Printer User Guide
.
Figure 2-3. Pressure priming the ink lines.
6. Leave the print head carriage over the blotting cloth for 5-10 minutes.
7. Remove and discard the blotting cloth and press CANCEL to return the carriage to the
maintenance station.