Occhio 3d body pico, Инструкция по монтажу

Страница: 79 / 96

31
Drill a hole with a diameter
of 32 mm.
Panel thickness:
min. 7.5 - max. 15 mm
The power supply unit can no longer
be accessed through the opening
after the panel has been installed.
An inspection flap should therefore
be provided at another location.
Power lines should be routed before
the panel is installed and these
should be guided to the opening of
the panel.
Fitting in gypsum plaster boards
only with mounting board (see previ-
ous section)
LED connection cable from the
converter or extension cable with
LED socket
External
Occhio converter
230 V AC
mains cable
3d pico plug (panel)
Caution:
The socket for the luminaire con-
nection cable must be inserted into
the protective cover.
Tape together the security wire and
LED cable just after the plug, as
shown in the illustration.
The cable and security wire can only
then be pulled out after fitting.
Connecting an external Occhio
converter (see supplementary sheet
for the converter):
Lengthen the cable provided, if neces-
sary, and connect it to the external
converter.
Connect the converter to the mains
cable as shown in the wiring diagram.