Occhio 3d body pico, Инструкция по монтажу

Страница: 78 / 96

30
Drill a hole with a diameter
of 32 mm.
Panel thickness:
min. 7.5 - max. 15 mm
The power supply unit can no longer
be accessed through the opening
after the panel has been installed.
An inspection flap should therefore
be provided at another location.
Power lines should be routed before
the panel is installed and these
should be guided to the opening of
the panel.
Fitting in gypsum plaster boards
only with mounting board (see previ-
ous section)
32 mm
diameter
7.5-15 mm
Panel fitting 3d pico plug (panel)