44
GB
Assembly
Installing the product
Product overview
Scope of delivery
Figure 1 – Page 3
• 1 x awning
• 1 x wind sensor
• 1 x radio remote control
• 1 x wall bracket for radio remote control
• 3 x wall brackets
• 1 x adjustable Allen key
• 1 x hand crank
• 12 x bolt anchors
• 1 x set of original operating instructions
• 2 x screws and dowels for mounting the wind
sensor (not shown)
Required tools and aids
• Drill
• Masonry drill bit 12 mm
• Masonry drill bit 8 mm
• Measuring tape/yardstick
• Pencil/chalk
• Hammer
• Step
• 2 ladders
• Adjustable wrench
Figure
1.
Cover
2.
Cassette
3.
Awning motor
4.
Hinged arm
5.
Cloth
6.
Front cover
7.
Hinged arm bracket
8.
Wall bracket
9.
Connection cable
10. LED strip
Wind sensor
11. Console
12. Connection shaft
13. Propeller
Radio remote control
14. Extending
15. Stopping
16. Retracting
17. Control lamp
18. Switching the LED illumination on and off
19. P2 button
20. Battery compartment
21. Wall bracket for radio remote control
• Before mounting your awning, select the requi-
red mounting height (C) in accordance with the
required angle of slope and the front line (H) of
the awning:
To avoid head injuries, the height of the front line (H)
should always be greater than your own height.
• When selecting the installation location, observe
the necessary lateral distance to the awning.
– Remove the fixing screws (22) and holding
plates (23) of the individual wall brackets (8).
– Undo the adjustment screw (24) with a suitable
Allen key.
– Rotate far enough out that there is a gap of at
least 40 mm between the adjustment screw (24)
and the wall bracket (8).
DANGER! Risk to life!
The electrical con-
nection may only be carried out by an
appropriately qualified professional.
Before installation, switch off the power to
the electrical network (switch off at the
main switch/fuse box).
DANGER! Risk to life!
Two persons must
be present when installing the awning.
Two ladders are required. The awning
should be attached precisely horizontally
to guarantee a smooth extension and ret-
raction of the awning. Maintain a safe
stance during the installation process.
Note: If any one of the parts is missing
or damaged, contact the retailer.
Angle of slope
Mounting height C
85°
H + 250 mm
80°
H + 450 mm
75°
H + 650 mm
70°
H + 850 mm
65°
H + 1050 mm
60°
H + 1250 mm
210563_LED_Markise_elektr.book Seite 44 Freitag, 2. Oktober 2015 5:35 17
Содержание 210563
