•
Setting of air humidity level:
•
Press the SET button (8), the air humidity display (6) flashes.
•
Press the + (9) and the – (7) buttons to adjust to optional level (min 30% and
max 70% relative air humidity (the capacity of the air to absorb water vapour at
various temperatures).
•
When the air humidity level has been set, the display will revert to the actual air
humidity level of the surroundings.
Attention! The air humidifier stops generating vapour once the set air humidity
level has been reached. The air humidifier restarts to emit vapour when the air
humidity in the closest surroundings is about 5% (relative air humidity) below
the set air humidity level.
•
In order to choose a continuous mode, press the + button (9) until the display
shows 70% and press the + button once again. The display (11) features CO as
an indication that the generation of vapour is not affected by the air humidity
obtained in the room.
Setting of timer:
•
Press the SET button (8) twice until H is displayed.
•
Press the + (9) and the – (7) buttons to set the timer from 0-12 hours.
•
The timer starts to count down. When it reaches 0, the air humidifier stops
generating vapour and reverts to standby position.
•
If the timer is set at 0 hours, the air humidifier works continuously.
Attention! It is quite normal that the display changes between air humidity
level and timer setting.
How to change the air humidification capacity
The air humidifier has three capacity levels that can be changed by means of the + (9)
and the – (7) buttons.
Low capacity:
The generated vapour is up to 100 ml/h. The indicator (10) of low
capacity is on.
Medium capacity:
The generated vapour is up to 200 ml/h. The indicator (10) of low
and medium capacity is on.
High capacity:
The generated vapour is up to 300 ml/h. All indicators (10): low,
medium and high are on.
Indication of low water level
When there is no water left in the water tank, the appliance switches to standby
position within a few seconds. The appliance beeps 10 times and the illumination of
the vapour chamber and the indicator (2) of ”cooler/warmer” functions flash.
33
6162_ES_0512.indd 33
2012-05-10 10:28:03