background image

Instruction Manual and 
Warranty Information

EV-HD10

ULTRASONIC 

COOL MIST HUMIDIFIER

©2009 THE SHARPER IMAGE and its affiliated companies, all rights reserved. THE SHARPER IMAGE is a 

registered trademark of THE SHARPER IMAGE and its affiliated companies. All rights reserved.

IB-EVHD10

ONE YEAR LIMITED WARRANTY

SI PRODUCTS sells its products with the intent that they are free of defects in manufacture and 

workmanship for the life of the original purchaser from the date of original purchase, except as noted 

below. SI PRODUCTS warrants that its products will be free of defects in material and workmanship 

under normal use and service. This warranty extends only to consumers and does not extend to 

Retailers. 
To obtain warranty service on your SI PRODUCTS product, mail the product and your dated sales 

receipt (as proof of purchase), postpaid, to the following address:
SI PRODUCTS Consumer Relations 

Service Center Dept. 168 

3000 Pontiac Trail 

Commerce Township, MI 48390 

No COD's will be accepted.
SI PRODUCTS does not authorize anyone, including, but not limited to, Retailers, the subsequent 

consumer purchaser of the product from a Retailer or remote purchasers, to obligate SI PRODUCTS 

in any way beyond the terms set forth herein. This warranty does not cover damage caused by 

misuse or abuse; accident; the attachment of any unauthorized accessory; alteration to the product; 

improper installation; unauthorized repairs or modifications; improper use of electrical/power supply; 

loss of power; dropped product; malfunction or damage of an operating part from failure to provide 

manufacturer’s recommended maintenance; transportation damage; theft; neglect; vandalism; or 

environmental conditions; loss of use during the period the product is at a repair facility or otherwise 

awaiting parts or repair; or any other conditions whatsoever that are beyond the control of SI 

PRODUCTS. 
This warranty is effective only if the product is purchased and operated in the country in which the 

product is purchased. A product that requires modifications or adoption to enable it to operate in any 

other country than the country for which it was designed, manufactured, approved and/or authorized, 

or repair of products damaged by these modifications is not covered under this warranty.
THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE 

SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF THE COMPANY WITH 

RESPECT TO PRODUCTS COVERED BY THIS WARRANTY. SI PRODUCTS SHALL HAVE NO LIABILITY FOR 

ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS WARRANTY 

REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO 

BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY. 
NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT 

AVAILABLE, SI PRODUCTS RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF 

REPAIR OR REPLACEMENT.
This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed 

products, including but not limited to sale of such products on Internet auction sites and/or sales of 

such products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately 

cease and terminate as to any products or parts thereof which are repaired, replaced, altered, or 

modified, without the prior express and written consent of SI PRODUCTS. 
This warranty provides you with specific legal rights. You may have additional rights which may vary 

from state to state. Because of individual regulations, some of the above limitations and exclusions 

may not apply to you. 
For more information regarding our product line in the USA, please visit: www.siproducts.com
For service or repair - do not return this unit to the retailer.
Contact SI PRODUCTS Consumer Relations at 1-888-856-6781.
©The Sharper Image. All rights reserved. THE SHARPER IMAGE name and logo are registered 

trademarks. 

SI Products 
Service Center

1.888.856.6781
8:30a.m. – 7:00p.m. (EST) 
M – F

Mail To: SI Products
Consumer Relations
Service Center Dept. 168
3000 Pontiac Trail
Commerce Township, MI 
48390

e-mail:
[email protected]

Summary of Contents for EV-HD10







Reviews: