6
SHIPPING BRACKET REMOVAL / TOE
-
KICK REMOVAL / REMOVAL FROM SKID / CASE ALIGNMENT
1. Removing Shipping Brackets Attached
To Skid
•
Remove screws holding case shipping brackets to
skid.
•
Remove case shipping brackets from skid.
•
See illustrations at right. Note: Shipping brackets
will vary in size, shape, material and location
depending upon case type and model.
2. Remove Front / Rear Toe
-
Kicks Before
Removing From Skid
•
Toe
-
kicks are normally shipped separately.
•
If toe
-
kicks are attached to case, they must be
removed.
•
Toe
-
kicks may be attached to case via slot /magnet
method.
•
Remove toe
-
kick by pulling away from lower
magnet and lifting up and off hooks.
•
No screw removal is required.
•
See illustrations at mid
-
right.
3. Remove Case From Skid
•
Important! If case is shipped with levelers, they will
be in the
DOWN
position (for stability). To prevent
damage to the case, all levelers must be raised
ALL THE WAY UP
before moving unit off skid and
into position.
•
To prevent damage, support case while sliding
it toward edge of skid).
•
IF NO CASTERS ARE ON SKID, tip case
slightly back and slide skid from underside of
case.
When case is at edge of skid, carefully
lower to floor (so two levelers rest on floor).
•
IF CASTERS ARE ON CASE, it may be rolled
off skid via ramp (as shown in lower
-
right
illustration).
•
Carefully slide skid out from under case.
•
After removal of case from skid, place into
position.
•
Note: Illustration below
-
right may not reflect your
particular model or options).
4. Position/Align Case Alongside Other Cases
•
If lineup requires it, be sure to position/align your
case alongside adjoining cases before adjusting
levelers or shimming frame support rails.
•
This may require the repositioning of the case you
are installing or the already positioned cases.
Note: View at Right
Shows Partially
Disassembled Case
For Illustrative
Purposes Only.
Hook
(Typical)
Front Panel/Toe
-
Kick
(For Slot/Hooks and
Magnet System)
Magnet
(Typical)
Various Types Of
Shipping Brackets
Shown With
