8
SHIMMING FRAME SUPPORT RAILS / ADJUSTING LEVELERS
1. Cases With Frame Support Rails: Shim
•
Illustration at top
-
left shows case with frame
support rails.
•
Shims will be provided on cases with frame
support rails.
•
Use shims to level case.
2. Cases With Levelers: Adjust
•
Important! For cases with casters, after case is in
proper position, levelers must then be
LOWERED
to floor.
Frame
Support Rails
•
Adjust case so it is level and plumb.
•
You may need to remove front and/or rear
toe
-
kick to access levelers.
•
Use adjustable wrench (and possibly a pry bar)
to adjust leveler.
•
Do not use pry bar on toe
-
kick (it may buckle).
•
Do not use pry bar on end panel (it may chip).
•
Use pry bar ONLY on base frame to avoid
damaging case.
•
Use a block to reach base frames with pry bar.
•
See below
-
right illustrations.
Pry Bar
Base Frame
Leveler
Adjustable
Wrench
