Optional Product Step
(Not on All Cases)
Shown For Illustrative Purposes Only
22
MAINTENANCE
-
LED LIGHT FIXTURES / LOCATION / REPAIR / REPLACEMENT
Note: Illustrations Shown May Not
Exactly Reflect Every Feature or
Option of Your Particular Case.
LED Style Light Fixtures
Removal of Faulty LED Lights:
•
LED lights rarely require change
-
out.
•
Contact Structural Concepts
’
Technical Service Depart-
ment for replacement LED lights.
•
Turn off LED light switch.
•
To remove faulty LED light, follow these steps:
A.
Disconnect plug from LED light.
B.
Using both hands, grasp LED light assembly (with its
magnetic mounting clips). Pull downward and off its
shelf (or header).
C.
Remove magnetic mounting clips from LED light by
pressing against flange part of clip with thumb.
>> Note: Mounting clips MAY be riveted to shelf or header.
In such instances, simply remove LED light from mounting
clips by pressing against flange part of clips with thumb.
Replacement of LED lights:
•
Attach magnetic mounting clips onto LED light.
•
Adjust magnetic mounting clips so they are equally
spaced on LED light.
•
Reattach LED light assembly to its shelf/header.
•
Position properly in shelf/header.
>> Note: If mounting clips are riveted to shelf (or header),
attach by placing LED in base of clip and then snapping into
clip at FLANGE SIDE.
•
Press plug
’
s barrel
-
shaped insert all the way into LED
light.
•
Important: If plug is not inserted ALL THE WAY IN
the LED light
’
s orifice, the light may not energize.
See
“
BAD
”
vs.
“
GOOD
”
insertion illustrations
below
-
right.
•
Turn LED light switch back on.
Gap
No Gap
A
Plug
Barrel
Shaped
Insert
LED
Light
Magnetic Mounting
Clip View #2
LED
Lights
B
C
Magnetic Mounting
Clip View #1
