ViSee™ LVM-500 Portable Digital Video Magnifier
Instruction for Use
1
、
Install the Battery
a
、
Turn the product over
b
、
Press against the battery cover, then push and slide outward to open
the battery cover.
c
、
Install the battery according to the hint of the positive and negative
terminals, and push the battery in right place.
d
、
Close the battery cover, then push and slide inward the cover in
place until hearing a sound of
“click”.
2
、
Charging the Battery
a
、
Connect the video magnifier with the power adapter through an USB cable.
b
、
Connect the power adapter to the commercial power.
c
、
Recharging is underway when magnifier
’s charging indicator is
on (red).
d
、
When the battery charging indicator light (red) of the video
magnifier
shines, it shows that it is being charged.
e
、
When the battery charging is finished, the charging indicator light
(red) will turn off.
f
、 P
lease make sure that the battery i s fully charged for first time use.
g
、
If the machine prompts low power, please charge the battery
immediately.
Attention: In the battery charging process, please keep the charger and
the video magnifier in a cooler area with good heat dissipation and
ventilation to avoid dangers caused by overheating.
3
、
Power on and Power off
a
、
When the power button is
in the “on” position, the video magnifier
will start up; when the green indicator light shines, it enters into visual
aid mode.
b
、
When the screen center is placed over the reading materials, it can be
used.
c
、
The best reading effect can be reached through adjusting the
magnification,
enhancing the mode and locking the screen.
d
、
When the power key is pushed to the
“OFF” position, the video
magnifier will shut down.
Attention: in order to get the best effect,
please remember to remove
the protective films on the LCD screen and on the lens shield
.
6
