Oase StreamMax Classic 2000, Руководство по эксплуатации

Страница: 6 / 20

6
StreamMax Classic 2000/4000/5000
- EN -
Malfunction Cause Remedy
Unit does not start up
No main voltage Check the main voltage
Impeller unit blocked Clean
Water flow insufficient
Position of the flow controller Readjust the flow regulator
Pump housing or impeller unit soiled Clean
Impeller unit worn Replace
Only submersed during installation Pump housing clogged Clean
TROUBLESHOOTING
MAINTENANCE AND CLEANING
• Clean the unit as required but at least twice a year
• When cleaning the pump, pay particular attention to the cleaning of the impeller unit and pump housing.
• Switching on: Connect the unit to the main power. The unit switches on immediately.
• Switching off: Disconnect the unit from the main power.
NOTE
Ensure that the pump never runs dry!
The pump will be destroyed.
• Only operate the pump when it is fully submerged in water.
COMMISSIONING/START-UP
CLEANING THE UNIT/REPLACING
THE IMPELLER UNIT
J
• Dismantle the pump and clean all parts under
running tap water, using a brush.
– Replace the impeller unit, if necessary.
• Reassemble the pump in the reverse order.