Oase AquaMax Eco Titanium 30000, Руководство по эксплуатации

Страница: 17 / 27

- EN -
27
Remedy of faults
Malfunction Cause Remedy
Pump does not start No mains voltage − Check the mains voltage.
− Check supply lines.
− Switching on the pump with Eco Control
Pump does not deliver. Excessively soiled water
− Clean the pump. The pump automatically
switches on again once the motor has
cooled down.
The impeller unit is blocked
− Disconnect the power supply and remove
obstacle. Then switch the pump on again.
Insufficient delivered quantity Impeller unit is running sluggishly − Clean
Excessive loss in the pipes due to friction
− Select a larger pipe diameter.
− Reduce pipe length to the necessary mini-
mum.
− Avoid unnecessary bends and connection
elements.
Pump switches off after a short running period. Excessively soiled water
− Clean the pump. The pump automatically
switches on again once the motor has
cooled down.
Water temperature too high
− Note maximum water temperature of
+35°C. The pump automatically switches
on again once the motor has cooled down.
The impeller unit is blocked − Disconnect the power supply and remove
obstacle. Then switch the pump on again.
Pump has run dry.
− Flood the pump. Fully submerge the pump
for operation in the pond.
Maintenance and cleaning
W A R N I N G
Possible death or severe injury from hazardous electrical voltage!
• Prior to reaching into the water, isolate (switch off and disconnect) all units/devices used in the water.
• Isolate the device (disconnect from the power supply) before carrying out any work on it.
Cleaning the unit
N O T E
Recommendation regarding cleaning:
• Clean the unit as required but at least twice a year.
• When cleaning the pump, pay particular attention to the cleaning of the impeller unit and pump housing.
• Do not use aggressive cleaning agents or chemical solutions as they could attack the housing or impair the function
of the unit.
• Recommended cleaning agent for removing stubborn limescale deposits:
– Pump cleaning agent PumpClean from OASE.
– Vinegar- and chlorine-free household cleaning agent.
• Clean the outside of the pump.
– Use a soft brush as an aid.
– The formation of a thin layer of rust is normal and does not negatively affect the function.
• After cleaning, thoroughly rinse all parts in clean water.