background image

4

symbol 

iden

Tifi

C

a

Tion

symbol identification

 

This symbol, when used in this manual and on product labels, represents a caution 

warning. Be sure to read and comply with all precautions and warnings. 

This symbol, when used in this manual and on product labels, indicates the 

potential of exposure to harmful x-rays. Be sure to read and comply with all 

warnings.

This symbol, when used in this manual and on product labels, indicates that the 

table and components are a Type B Applied Part pursuant to IEC 601.1 and EN 

60601-1: 1990.

This symbol when used in this manual or on product labels, warns that when 

stacking containers during transport and storage, there should be do not stack 

more than 5 containers high.

This symbol, when used in this manual or on product labels, indicates that the 

product should be protected from moisture. The humidity  specifications for 

Transport & Storage are listed on page 23.

This symbol, when used in this manual or on product labels, indicates that  

information is given regarding the recommended temperature limits during  

transport and storing.

This symbol, when used in this manual or on product labels, indicates  

 

the date of manufacture of the device.

U L   2 6 0 1 - 1

C S A   C 2 2 . 2   N O . 6 0 1 . 1

I E C   6 0 6 0 1 - 2   ( 2 0 0 1 - 0 9 )

C

U S

L I S T E D

R

U L   2 6 0 1 - 1

C S A   C 2 2 . 2   N O . 6 0 1 . 1

I E C   6 0 6 0 1 - 2   ( 2 0 0 1 - 0 9 )

C

U S

L I S T E D

R

U L   2 6 0 1 - 1

C S A   C 2 2 . 2   N O . 6 0 1 . 1

I E C   6 0 6 0 1 - 2   ( 2 0 0 1 - 0 9 )

C

U S

L I S T E D

R

U L   2 6 0 1 - 1

C S A   C 2 2 . 2   N O . 6 0 1 . 1

I E C   6 0 6 0 1 - 2   ( 2 0 0 1 - 0 9 )

C

U S

L I S T E D

R

U L   2 6 0 1 - 1

C S A   C 2 2 . 2   N O . 6 0 1 . 1

I E C   6 0 6 0 1 - 2   ( 2 0 0 1 - 0 9 )

C

U S

L I S T E D

R

Содержание Spine Positioning System

























Отзывы: