OAK SCSI 4, Руководство пользователя

Страница: 45 / 54

X Transfer speed test
This option tests the average sustained data transfer rate from a given
formatted and initialised drive in screen modes 0, 15 and 21. Note that
this option requires a large amount of memory for a buffer, and
consequently may fail on a 1Mb machine with an `Out of memory'
error. This can be avoided by minimising memory allocation to other
areas within the wimp task manager, and assigning a large slot size to
SCSIFORM, or by running SCSIFORM from outside the desktop with
memory sizes configured to minimum values. The speed test requires
the Archimedes to enter mode 21, so the configured monitor type must
be '1', and there must be at least 320K of screen RAM available.
Information required by SCSIFORM is as follows:
Drive Number
SCSIFS drive number of the drive you wish to test (4 to 7).
When the transfer speed test is complete, the speed in Kbytes/second in
each of the 3 screen modes is reported.
Page 3 8