OAK SCSI 4, Руководство пользователя

Страница: 19 / 54

You will then have to decide how much memory to assign to the SCSI
directory cache. The value will depend on the amount of memory
available in your machine. A value of 4K is recommended: higher
values will allow more directories to be cached in RAM, a lower value
will allow fewer directories to be stored in RAM. To configure this
value, obtain a command line prompt and type:
*configure scsidircache 4K [Return]
or replace the 4K with the value you have decided on.
The next decision is whether or not to have the root directory of the
winchester set as the current directory at power on (this is equivalent to
ADFS's configure dir/nodir, and is effective only if the configured
filing system is SCSIFS). If you want the root directory set, type:
*configure scsidir [Return]
otherwise type:
*configure scsinodir [Return]
You may want the default filing system of the Archimedes at power up
to be SCSIFS (e.g. if you want to run a boot file from your SCSI
winchester). If this is the case type:
*configure filesystem scsi [Return]
To bring these configuration values into effect, hold down
[
Ctrl ]
whilst pressing and releasing [
Break ]
You may now enter the desktop and click on the new SCSI winchester
icon. A directory viewer should open. Open up the sprites directory
and double click select on one of the files. If a picture is loaded up
onto the screen. all is well and you may replace the screws in the
Archimedes case.
Page 1 2