manualshive.com logo in svg

O.S. engine MAX FXi 46, Инструкция пользователя

Поделиться
Скачать
O.S. engine MAX FXi 46 Скачать руководство пользователя страница 6

Do not start your engine in an area
containing loose gravel or sand. The
propeller may throw such material in
your face and eyes and cause injury.

For their safety, keep all onlookers
(especially small children) well back (at
least 20 feet or 6 meters) when
preparing your model for flight. If you
have to carry the model to the take-off
point with the engine running, be
especially cautious. Keep the propeller
pointed away from you and walk well
clear of spectators.

•

Warning! Immediately after a glow plug
ignition engine has been run and is still
warm, conditions sometimes exist
whereby it is just possible for the engine
to abruptly restart if the propeller is
casually flipped over compression
WITHOUT the glow plug battery being
reconnected. Remember this if you
wish to avoid the risk of a painfully
rapped knuckle!

NOTES!
•

Adjust the throttle linkage so that the
engine stops when the throttle stick and
trim lever on the transmitter are fully
retarded. Alternatively, the engine may be
stopped by cutting off the fuel supply.
Never try to stop the engine physically.

•

Take care that loose clothing (ties, shirt
sleeves, scarves, etc.) do not come into
contact with the propeller. Do not carry
loose objects (such as pencils,
screwdrivers, etc.) in a shirt pocket from
where they could fall through the
propeller arc.

•

After starting the engine, carry out any
needle-valve readjustments from a safe
position behind the rotating propeller.
Stop the engine before attempting to
make other adjustments to the
carburetor.

6

Содержание MAX FXi 46





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды