O.S. engine MAX FXi 46, Инструкция пользователя

Страница: 22 / 28

1. At the end of each operating session,
drain out any fuel that may remain in
the fuel tank.
2. Next, energize the glow plug and try to
restart the engine to burn off any fuel
that may remain inside the engine.
Repeat this procedure until the engine
fails to fire. Remove the glow plug and
eject any residue by rotating the engine
with an electric starter for 4 to 5
seconds while the engine is still warm.
3. Finally, inject some after-run oil into the
engine. Rotate the engine a few times
by hand, to make sure that it is free,
and then with an electric starter for 4 to
5 seconds to distribute the oil to all the
working parts.
Note: Do not inject after-run oil into the
carburetor as this may cause the 0-ring
inside the carburetor to deteriorate.
These procedures will reduce the risk of
starting difficulties and of internal corrosion
after a period of storage.
Your engine is guaranteed to be free of
defects in parts and workmanship for a
period of two (2) years from the date of
purchase when returned for service
accompanied by your proof of purchase.
Crash damage and problems caused by
neglect or abuse will not be covered under
warranty. Damage caused by customer
disassembly, tampering, use of
substandard fuel, use of incorrect
accessories (glow plug, prop, etc.), or any
use of the engine for which it is not
specifically intended will automatically void
the warranty of the engine.
Should your engine require warranty or
non-warranty service please return it via
O.S. ENGINES LIMITED WARRANTY
ENGINE CARE & MAINTENANCE
22