8
Tips for speakers placement
Speaker position plays a critical role in setting up an optimal sound effect. For best effect, aim all the speakers towards
the seating position and place them close to your ear level (seated).
Spread out the speakers from left to right and from front to rear. Do not stack speaker on top of each other.
Follow the general guidelines for speakers placement
• Center speaker (
CENTER
): Place it directly in front of the seating position.
• Front left (
FRONT LEFT
) and front right (
FRONT RIGHT
): Place the left and right speakers in front of the seating
position, at equal distance from the center speaker. Ensure the left, right and center speakers are at equal distance
from your seating position.
• Rear left (
SATELLITE LEFT
) and rear right (
SATELLITE RIGHT
): Place the rear/satellite speakers to the left and
right side of your seating position, either in line with it or slightly behind it.
• Main unit (with subwoofer integrated): Place the main unit (subwoofer) in front of the seating position, almost in line
with the front and center speakers. Leave the subwoofer at least 2-3 inches clearance from the wall to minimize
sound reflection.
Mount speakers on wall (optional)
When drilling holes on wall, make sure there are no cables, wires or pipes located underneath the surface.
Inadvertently drilling through electric cables can cause life-threatening danger of an electric shock!
For wall mounting, the speakers must be securely attached to the wall. Improper wall mounting may result
in accident, injury or damage.
You can mount the speakers on wall using the supplied mounting brackets and screws.
1.
Fix a supplied bracket onto the back of a speaker.
Select a top location on the back of the speaker for bracket attachment. Then fix
a supplied bracket by fastening two supplied screws through two screw holes
on the bracket. Make sure the bracket is securely attached to the speaker.
Do not fasten the bracket in a low location on the back of the speaker. This can
cause instability when the speaker is mounted on wall.
2.
Select a location on wall to drill a screw hole. Use a screw of suitable length
and diameter (not included) to firmly fasten it on wall. Make sure the screw is
securely attached to the wall.
Then hang the speaker on the wall using the mounting hole on the bracket.
3.
Repeat the steps above to mount the other speakers on wall if needed.
Connect FM Antenna
For better FM radio reception, connect the plug of the supplied radio antenna to the
ANT
socket on the back of the
main unit.
Wall bracket
