11
Listen to Radio
You can listen to FM radio on your home theater, and store all the available FM radio stations.
Tune to a radio station
1.
Switch your home theater to radio source. Press
MODE
repeatedly until the display shows the radio frequency.
2.
Press and hold
TUNE+/-
on the remote control. The radio automatically tunes to a station with strong reception.
3.
Repeat the steps above until you find the desired station.
To tune to a weak station
•
Press briefly and repeatedly
TUNE+/-
on the remote control to adjust radio frequency until you find optimal recep
-
tion.
Store radio stations automatically
You can store all the available FM radio stations in the memory.
• In radio source, press /
SCAN
on the top panel (or
SCAN
on the remote control).
Search of radio stations starts automatically, and the available stations are stored.
Select a stored station
• In radio source, press
CH-/
or
/ CH+
on the top panel (or
CH+/-
on the remote control).
Or you can directly input a radio channel number via the numeric buttons on the remote control. After input, the
selected station will broadcast.
Play Audio Through Bluetooth
Pair with a mobile phone
Before you can stream music from your mobile device to the home theater, you must pair the home theater with your
mobile phone through Bluetooth.
1.
Switch your home theater to Bluetooth source. Press
MODE
repeatedly until the display shows “bt”.
-
“bt” flashes. This indicate that your home theater is not connected to a mobile device and currently in pairing
mode.
2.
On your mobile phone, enable Bluetooth then select “NYNE NHT5.1RGB” to pair the home theater with your
mobile phone. If prompted for password input on your mobile phone, input “0000”.
-
When the unit connects to your mobile phone, the “bt” on the display stops flashing and turns to solid light.
The home theater automatically connects to the last paired device each time the two are powered on. To
connect to a second device, you have to disconnect the currently connected device then repeat the steps
above to pair the device.
To disconnect the current Bluetooth connection, press and hold /
SCAN
on the top panel (or
SCAN
on
the remote control) for three seconds.
