Jumper default configuration
This section describes about the jumper configuration.
Quick Start
Block Diagram shows the maximum configuration.
Not all pins or all peripherals are available on all devices and packages. Rerouting options are not shown.
4
CAN-PHY
Pierce Oscillator
Temp
Sense
12-bit
Analog-Digital
Converter
MS-CAN
Internal RC
Oscillator,
+/- 1.3%
PLL
with Frequency
Modulationoption
8-Bit
DAC
Analog
Comparator
2 x SCI
2 SPI
S12ZCPU 32 MHz Bus
(25 MHZ @ >150°C Tj)
Hi-Res-PWM 4ch 16-bit
Hi-Res-Timer 4ch 16-bit
1 L1C
Up to 192KB
Flash (ECC)
PWM 4ch 16-bit
SENT
TIMER 4ch 16-bit
EEPROM
with ECC up to
2 K bytes)
RAM with ECC
up to8 K bytes
Real Time Interrupt
4 ch LSD (+25mA)
open drain
BDM/BDC
1ch HSD (+20mA)
open drain
2-HVI
V-SUP
Voltage Supply
Monitor
Vreg for CAN PHY
with ext. ballast (BCTLC)
Figure 1. S12ZVC architecture diagram1
