8
Software tools installation (cont.)
Quick Start
2
Launch the
demo program
The S12ZVC EVB board comes
preprogrammed with a small
demonstration application that
exercises the different modules
of the S12ZVC MCU family,
including the ADC, SCI, I2C,
and GPIO modules.
To see this demonstration:
•
Connect a 12 V power source
to the EVB.
•
Connect a USB cable to the
USB type B connector.
•
Press the keys on the keypad
to hear tones on the buzzer.
•
Tilt the EVB to observe changes
on the red and green LEDs.
•
Rotate the potentiometer to
observe changes on the orange LED.
•
Notice that the pressure sensor controls
the yellow LED.
The software for this application is
available on
nxp.com
.
