14
Headers and connectors list
Quick Start
The following table lists all of the connectors available in the S12ZVC evaluation board
and their corresponding signals.
Header /
Connector
Reference position
J1
Main power connector (up to 18 V)
J21
VBAT, VSUP, VDDX, VDDC, and VDDA are connected to this header.
J23
HVI Header
– External HVI signal
This jumper allows a monitoring/measurement of the High voltage signal. If J13
and J10 are disabled, the user can apply an external signal. This jumper (pin 1-2)
should always be OPEN.
J24
HVI Header
– External HVI signal
This jumper allows a monitoring/measurement of the High voltage signal. If J11
and J12 are disabled, the user can apply an external signal. This jumper (pin 1-2)
should always be OPEN.
J27
GPIO Header - Port T
J28
SENT transmitter header with GND
J33
GPIO Header - Port P
J34
BDM Connector
