manualshive.com logo in svg

NXP Semiconductors MPC5746R, Техническое описание

Поделиться
Скачать
NXP Semiconductors MPC5746R Скачать руководство пользователя страница 91

1. "PD" refers to a production device, orderable in quantity.
2. “ED" refers to an emulation device, orderable in limited quantities. An emulation device (ED) is for use during system

development only and is not to be used in production. An ED is a Production PD chip combined with a companion chip to
form an Emulation and Debug Device (ED) and includes additional RAM memory and debug features. EDs are provided
“as is" without warranty of any kind. In the event of a suspected ED failure, NXP agrees to exchange the suspected failing
ED from the customer at no additional charge, however NXP will not analyze ED returns.

22 Revision history

Table 61. Revision history

Revision

Date

Description of changes

1

05/2013

Initial release.

2

12/2014

Overall:

• Editorial changes.
• Removed the Classification columns in spec tables and removed statements that values need

to be characterized.

• In footnotes changed cross references to figures to static text.

In section 

Block diagram

 :

• In 

Figure 1

, changed "AIPS Bridge 0/1" to "AIPS PBridge_0/1".

• In 

Figure 2

 :

• Changed figure title (was “Peripherals block diagram”).
• Changed "BAF" to "BAR".
• Added PBRIDGE_1, EIM, XBAR, and PBRIDGE_0.

In section 

Introduction

, removed section "Parameter classification".

In section 

Absolute maximum ratings

, 

Table 1

 :

• VDD_HV_IO_FEC spec: removed row for "Using Ethernet Reference to VSS" condition.
• Corrected "VIDD_HV_IO_MSC" to "VDD_HV_IO_MSC".
• Add parameter IIOMAX.
• Deleted IMAXSEG parameter.

In section 

Operating conditions

 :

• Deleted sentence "The ranges in this table are design targets...".
• Added a NOTE that all power supplies need to be powered up.
• In 

Table 3

 :

• Removed VDD_HV_FLA.
• Changed minimum voltage of VDD_HV_ADV_SD.
• Modified footnote for S/D ADC supply voltage.
• Modified footnote for SAR ADC supply voltage.
• Modified VRAMP spec to two separate specs for "VRAMP_VDD_LV" and

"VRAMP_VDD_HV_IO_MAIN, VRAMP_VDD_HV_PMC".

In section 

DC electrical specifications

 :

• Removed the statement that the ranges are design targets.
• In 

Table 5

 :

• Modified I

DD_LV

 to show specs depending on device model. Modified footnote.

• Removed the “PMC only” row of the IDD_HV_PMC “internal core reg bypassed” spec.
• Removed IDD_MAIN_CORE_AC.
• Removed IDD_LKSTP_AC.
• Changed I

DDSTBY_ON

 value at 40 °C.

• Changed I

DDSTBY_REG

 parameter to "32 KB RAM Standby Regulator Current" (was

"Standby Leakage Current"); changed condition to "V

DDSTBY

 @1.2 V to 5.9 V, Tj =

150C" (was "V

DDSTBY

 @1.3 V...")

Table continues on the next page...

Revision history

SPC5746R Microcontroller Data Sheet, Rev. 6, 06/2017

NXP Semiconductors

91

Содержание MPC5746R



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды