manualshive.com logo in svg

NXP Semiconductors MC68CK16Z1, Руководство пользователя

"MC68CK16Z1 от NXP Semiconductors - процессор высокой производительности для различных приложений. Обеспечивает быструю обработку данных и эффективную работу. Пользователям доступен бесплатный руководство на русском языке для ознакомления с функциями и настройками устройства. Скачайте его с {вебсайта}."

Поделиться
Скачать
background image

SYSTEM INTEGRATION MODULE

M68HC16 Z SERIES

5-58

USER’S MANUAL

5.8 Interrupts

Interrupt recognition and servicing involve complex interaction between the SIM, the
CPU16, and a device or module requesting interrupt service. This discussion provides
an overview of the entire interrupt process. Chip-select logic can also be used to re-
spond to interrupt requests. Refer to

5.9 Chip-Selects

 for more information.

5.8.1 Interrupt Exception Processing

The CPU16 handles interrupts as a type of asynchronous exception. An exception is
an event that preempts normal processing. Exception processing makes the transition
from normal instruction execution to execution of a routine that deals with an excep-
tion. Each exception has an assigned vector that points to an associated handler rou-
tine. These vectors are stored in a vector table located in the first 512 bytes of address
bank 0. The CPU16 uses vector numbers to calculate displacement into the table. Re-
fer to

4.13 Exceptions

 for more information.

5.8.2 Interrupt Priority and Recognition

The CPU16 provides for seven levels of interrupt priority (1 – 7), seven automatic in-
terrupt vectors, and 200 assignable interrupt vectors. All interrupts with priorities less
than seven can be masked by the interrupt priority (IP) field in the condition code
register.

There are seven interrupt request signals (IRQ[7:1]). These signals are used internally
on the IMB, and there are corresponding pins for external interrupt service requests.
The CPU16 treats all interrupt requests as though they come from internal modules;
external interrupt requests are treated as interrupt service requests from the SIM.
Each of the interrupt request signals corresponds to an interrupt priority level. IRQ1
has the lowest priority and IRQ7 the highest.

The IP field consists of three bits (CCR[7:5]). Binary values %000 to %111 provide
eight priority masks. Masks prevent an interrupt request of a priority less than or equal
to the mask value (except for IRQ7) from being recognized and processed. When IP
contains %000, no interrupt is masked. During exception processing, the IP field is set
to the priority of the interrupt being serviced.

Interrupt recognition is determined by interrupt priority level and interrupt priority (IP)
mask value. The interrupt priority mask consists of three bits in the CPU16 condition
code register (CCR[7:5]). Binary values %000 to %111 provide eight priority masks.
Masks prevent an interrupt request of a priority less than or equal to the mask value
from being recognized and processed. IRQ7, however, is always recognized, even if
the mask value is %111.

IRQ[7:1] are active-low level-sensitive inputs. The low on the pin must remain asserted
until an interrupt acknowledge cycle corresponding to that level is detected.

IRQ7 is transition-sensitive as well as level-sensitive: a level-7 interrupt is not detected
unless a falling edge transition is detected on the IRQ7 line. This prevents redundant
servicing and stack overflow. A non-maskable interrupt is generated each time IRQ7
is asserted as well as each time the priority mask is written while IRQ7 is asserted. If
IRQ7 is asserted and the IP mask is written to any new value (including %111), IRQ7
will be recognized as a new IRQ7.

 

   

  

F

re

e

sc

a

le

 S

e

m

ic

o

n

d

u

c

to

r,

 I

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

 

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

n

c

.

..

Содержание MC68CK16Z1






















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MC68CK16Z1

Omega PHCN-37 User Manual preview
PHCN-37
Бренд: Omega Страницы: 56
Omega DP25-TC Quick Start Manuals preview
DP25-TC
Бренд: Omega Страницы: 2
RADEMACHER Troll Comfort Mounting And Operating Instruction preview
Troll Comfort
Бренд: RADEMACHER Страницы: 68
Watts KONTACT Manual preview
KONTACT
Бренд: Watts Страницы: 17
mikroElektronika ETH WIZ click Quick Start Manual preview
ETH WIZ click
Бренд: mikroElektronika Страницы: 3
Window Master WMU 831 Installation Instructions Manual preview
WMU 831
Бренд: Window Master Страницы: 7
Linak TR-EM-288-SPF Quick Manual preview
TR-EM-288-SPF
Бренд: Linak Страницы: 2
Dungs 273061 Instructions Manual preview
273061
Бренд: Dungs Страницы: 56
Emec PH CONTROLLER Operating Manual preview
PH CONTROLLER
Бренд: Emec Страницы: 8
Zero 88 Chilli Master Operating Manual preview
Chilli Master
Бренд: Zero 88 Страницы: 34
DAPAudio IPS-VC3 User Manual preview
IPS-VC3
Бренд: DAPAudio Страницы: 11
Akytec SMI200 User Manual preview
SMI200
Бренд: Akytec Страницы: 15
Computherm PS Gate User Manual preview
PS Gate
Бренд: Computherm Страницы: 40
ETI PFC 12 RS User And Service Manual preview
PFC 12 RS
Бренд: ETI Страницы: 14
WAGO 750-8202/040-000 Manual preview
750-8202/040-000
Бренд: WAGO Страницы: 418
iceqube MINI MAX Programming Manual preview
MINI MAX
Бренд: iceqube Страницы: 2
Niko 410-00121 Manual preview
410-00121
Бренд: Niko Страницы: 10
V2 PESO-230V Manual preview
PESO-230V
Бренд: V2 Страницы: 108

Бренды по названию

Популярные бренды

Загрузить еще бренды