manualshive.com logo in svg

NXP Semiconductors Kinetis KE1xZ256, Справочное руководство

Поделиться
Скачать
NXP Semiconductors Kinetis KE1xZ256 Скачать руководство пользователя страница 513

                             flash_margin_value_t margin,

                             uint32_t *failedAddress,

                             uint32_t *failedData);

Table 22-54. Parameters

Parameter

Description

Config

Pointer to 

flash_config_t

 data structure in memory, to store driver runtime state.

Start

The start address of the desired flash memory to be verified.

LengthInBytes

The length, given in bytes (not words or long-words) to be verified. Must be word-aligned.

ExpectedData

Pointer to the expected data that is to be verified against.

Margin

Read margin choice as follows:

kFLASH_MarginValueUser 1 kFLASH_MarginValueFactory 2

FailedAddress

Pointer to returned failing address.

FailedData

Pointer to return failing data. Some derivatives do not include failed data as part of the FCCOBx
registers. In this instance, 0x00s are returned upon failure.

Table 22-55. Possible status response

Value

Contants

Description

4

kStatus_InvalidArgument

Config or expectedData pointers are NULL.

101

kStatus_FlashAlignmentError

Start or lengthInBytes is not longword-aligned.

102

kStatus_FLASH_AddressError

The range to be verified is invalid.

103

kStatus_FLASH_AccessError

The following situation causes this response:

1. Command is not available under current mode/

security.

2. An invalid margin code is supplied.

105

kStatus_FLASH_CommandFailure

Either of the margin reads does not match the
expected data.

0

kStatus_Success

This function has performed successfully.

Example:

Assume that flash region from 0x800 to 0x807 is successfully programmed with:

0x01 0x23 0x45 0x67 0x89 0xab 0xcd 0xef

uint8_t expectedData[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef };

status_t status = FLASH_VerifyProgram (&flashInstance, 0x800, 8, 

                   &expectedData[0], kFlashMargin_User, NULL, NULL);

NOTE

For the choice of margin, see the FTFA chapter in the reference
manual for detailed information.

22.4.5.11 FLASH_GetProperty

Chapter 22 Kinetis ROM Bootloader

Kinetis KE1xZ256 Sub-Family Reference Manual, Rev. 3, 07/2018

NXP Semiconductors

513

Содержание Kinetis KE1xZ256














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды