NuVision 52LEDLP, Руководство по эксплуатации

Страница: 44 / 59

32 Changing the Television Settings
Adjusting Analog Audio
Use the Analog Audio menu option to change the audio between mono, stereo, and SAP.
To adjust analog audio:
1. Press Menu on the remote control to display the OSD.
2. Press the VOL± buttons to select the Audio Settings menu.
3. Press the CH- button to select Analog Audio .
4. Press the VOL± buttons to select one of the following settings:
• Mono — used for channels that are broadcast in monaural.
• Stereo — used for channels that broadcast in stereo.
• SAP — (Second Audio Program) allows you to listen to the audio in a second language when one is
available (this is usually a foreign-language translation of the program).
5. Press Menu to close the OSD.
Adjusting Digital Audio
Use the Digital Audio menu option to set the language of the audio program.
To adjust digital audio:
1. Press Menu on the remote control to display the OSD.
2. Press the VOL± buttons to select the Audio Settings menu.
3. Press the CH- button to select Digital Audio .
4. Press the VOL± buttons to select the appropriate language:
5. Press Menu to close the OSD.
Using the Channel Settings Menu
The Channel Settings menu options allow you to select a scan frequency and automatically scan for and set up
available channels, as well as edit your favorites and channel lists. For complete steps on setting up available
channels, refer to “Setting Up Available Channels” on page 18.
Changing the Channel List
Use the Channel Set menu option to change the channel list and favorite channels.
To change channel settings:
1. Press Menu on the remote control to display the OSD.
2. Press the VOL± buttons to select the Channel Settings menu.
3. Press the CH- button to select Channel Set and then press the VOL+ button. The channel settings appear.
4. Press the CH- button to select Channel List .
5. Press the VOL± buttons to select the channel list setting - either Favorites or Source Valid .
6. Press Menu to close the OSD.
Editing Channels
Use the Edit Channels menu option to add or remove channels from the channel list.
To edit channels:
1. Press Menu on the remote control to display the OSD.
2. Press the VOL± buttons to select the Channel Settings menu.
3. Press the CH- button to select Channel Set and then press the VOL+ button. The channel settings appear.