18 Watching Television
Setting Up Available Channels
After you have finished connecting your television to either an antenna or cable service, you will need to scan for and
set up available channels.
Antenna Connection
To set up available channels if you have an antenna connected to the antenna input:
1.
Press
Menu
on the remote control to display the OSD.
2.
Press the
VOL±
buttons to select the
Source Settings
menu.
3.
Press the
CH-
button to select
Input Source
and then press the
VOL+
button. The input source menu options appear.
4.
Press the
CH-
button to select the
Main Source
option.
5.
Press the
VOL±
buttons to select
Antenna
and then press
Select
.
6.
Press the
CH+
and
VOL-
buttons to select the
Channel Settings
menu.
7.
Press the
CH-
button to select
Search on Air
an press the
VOL+
button to begin scanning for channels.
8.
Wait for the television to scan all available channels. The text “Channel Scan in Progress” will be displayed
while the channels are scanned. When the channel scan is complete, the available channels can be viewed.
Cable Connection
To set up available channels if you have cable service connected to the cable input:
1.
Press
Menu
on the remote control to display the OSD.
2.
Press the
VOL±
to select the
Source Settings
menu.
3.
Press the
CH-
button to select
Input Source
and then press the
VOL+
button. The input source menu options appear.
4.
Press the
CH-
button to select the
Main Source
option.
5.
Press the
VOL±
buttons to select
Cable
and then press
Select
.
6.
Press the
CH+
and
VOL-
buttons to select the
Channel
Settings
menu.
7.
Press the
CH-
button to select
Scan Freq
and then press the
VOL±
buttons to select a scan frequency.
8.
Press the
CH-
button to select
Search on Cable
and then press the
VOL+
button to begin scanning for
channels.
9.
Wait for the television to scan all available channels. The text “Channel Scan in Progress” will be displayed
while the channels are scanned. When the channel scan is complete, the available channels can be viewed.
NOTE:
The channel scan feature will only find channels from the antenna and cable inputs. If you have
connected a satellite receiver or cable box to your television, you must set up that device before you
can view channels from that source.
NOTE:
The following steps can take from one minute to more than 30 minutes, depending on the available
channels in your area.
NOTE:
To cancel the channel scan, press the
Menu
button on the remote control.
NOTE:
To cancel the channel scan, press the
Menu
button on the remote control.
POWER
SRS
Comp1
Comp2
HDMI 1
HDMI 2
Cable
Antenna
AV1
AV2
AV3
Picture
Guide
Menu
CH
POWER
SRS
Comp1
Comp2
HDMI 1
HDMI 2
Cable
Antenna
AV1
AV2
AV3
Picture
Guide
Menu
CH
Содержание 52LEDLP
