NuVision 52LEDLP, Руководство по эксплуатации

Страница: 41 / 59

Changing the Television Settings 29
5. Press Menu to close the OSD.
Changing the OSD Settings
Use the OSD Settings menu to change the on-screen display transparency or the on-screen display timeout.
To change the OSD settings:
1. Press Menu on the remote control to display the OSD.
2. Press the VOL± buttons to select the General Settings menu.
3. Press the CH- button to select OSD Settings and then press the VOL+ button. The OSD settings appear.
4. Press the CH± buttons to select one of the following settings.
• OSD Position — Changes the position of the OSD on the television screen. Press the VOL± buttons to
move the OSD to the center, right top or bottom, or left top or bottom areas of the screen.
• OSD Timeout — Changes the number of seconds the television must be inactive before the OSD
closes. Press the VOL± buttons to increase or decrease the number of seconds between 10, 30, and 60
seconds.
5. Press Menu to close the OSD.
Setting the Clock
Use the Clock Setup menu to adjust the television clock settings.
To set the clock:
1. Press Menu on the remote control to display the OSD.
2. Press the VOL± buttons to select the General Settings menu.
3. Press the CH- to select Clock Setup and then press the VOL+ button. The clock setup options appear.
4. Press the CH± buttons to select one of the following options:
• Set Time Zone — Sets the time zone used by the television clock. Press the VOL± buttons to select the
desired time zone.
• Observe Daylight Savings — Specifies whether or not the television clock observes daylight savings
time. Press the VOL± buttons to select Yes or No .
5. Press Menu to close the OSD.
Resetting the Television Settings
Use the Reset Settings menu option to reset the television setup options to factory defaults. All picture, image, audio,
general, and picture-in-picture settings will be reset to defaults.
To reset the television settings:
1. Press Menu on the remote control to display the OSD.
2. Press the VOL± buttons to select the General Settings menu.
3. Press the CH- button to select Reset Settings and press the VOL+ button. A Confirmation submenu
appears.
4. Press the Select button to reset the television settings to factory defaults.
5. Press Menu to close the OSD.
TIP: When the sleep timer is set, pressing the Sleep button on the remote control will display the current number
of minutes until the television turns off.
TIP: The clock on the television is automatically set. If the television loses power, the clock will automatically be
reset.