18 •
Main Menu
A. LENS
This function is used to adjust the brightness of the screen.
• DC: The brightness can be adjusted in DC mode. The brightness can be
adjusted within the range of 1 to 70.
• MANUAL: Manual lens selection.
B. SHUTTER
This function is used to control the condition and speed.
• NONE: Shutter is off.
• FLK: Select ‘FLK’ mode when flickering occurs on the screen due to imbalance
between illumination and frequency.
• ESC: Select ‘ESC’ mode for automatic control of shutter speed. The speed is
controlled automatically according to the brightness of the screen.
• MANUAL: Select MANUAL mode to control shutter speed manually.
C. WHITE BALANCE
This function is used to balance the screen color.
• ATW (Auto Tracking White Balance):
Select ‘ ATW’ when u sing w ithin t he color t emperature range o f 1,800
∞
K to
10,500
∞
K (Ex. Fluorescent light, outdoor, sodium vapor lamp or inside tunnels)
• AWC (Auto White Balance Control):
Select SETUP button while the camera is directed at a piece of white paper to
obtain the optimum state under current illumination. I f the environment
including t he light source i s changed, you h ave t o adjust t he w hite b alance
again.
• MANUAL (Auto White Balance Control):
Select ATW or AWC first before selecting Manual mode. Once Manual mode is
selected, select SETUP. Set the appropriate color temperature, and increase or
decrease the red and blue color values while monitoring the color changes on
the object. The Manual mode enables finer adjustment.
OSD Menu Instructions
OSD Menu Instructions
D. BACKLIGHT
This function is used when there is strong light in the background.
• OFF: Backlight Compensation is off.
• LOW: Select if there is little light in the background.
• MIDDLE: Select if there is moderate light in the background.
• HIGH: Select if there is a great amount of light in the background.
E. AGC
This function is used to adjust the level of gain. As the level of gain increases,
the screen gets brighter and the level of noise also increases.
• OFF: The gain is fixed at 6dB.
• LOW: The gain increases or decreases within the range of 6dB to 18dB.
• MIDDLE: The gain increases or decreases within the range of 6dB to 30dB.
• HIGH: The gain increases or decreases within the range of 6dB to 34dB.
F. DNR
This function is used to reduce the signal noise on the screen.
• OFF
• LOW
• MIDDLE
• HIGH
G. DSS
This function is used to help maintain a b right, clear screen image by
automatically detecting changes in the level of light in low light conditions.
• OFF: SENS UP function off.
• AUTO: Low light level auto mode.
* DSS does not operate if SHUTTER is set to MANUAL
* DSS does not operate if AGC is turned OFF.
• 19
