12VDC/24VAC
CCTV Monitor
• Power connection - Requires 12VDC or 24VAC input depending on camera model.
• All camera model are supplied with second video output on the camera module. To use
this feature along with a service monitor, second monitor cable/connector
(
Part# CA-SMC30
) is required. Contact your distributor or NUVICO Sales Department
for further information.
Service Monitor
CA-SMC30
30cm
Left
Right
Up
Right
Down
S Series / SD Series
Service Monitor Output
12 •
Connections
N
T
W
Adjust Focus
Adjust Angle for Field of View
Remove the Gimbal cover from the Gimbal base.
1
Loosen Zoom & Focus screws and make necessary adjustments as shown.
Field of View:
Telephoto( T ) to Wide( W )
Focus:
Near( N ) to Far( F )
2
Please refer to Page 14 of this manual for further instructions.
4
Replace the Gimbal cover back to the Gimbal base.
3
Focus
Zoom
Gimbal Cover
1
2
2
4
Left
Right
Up
Right
Down
S Series / SD Series
• 13
Vari-focal, DC Auto Iris Lens Adjustments
F
