Nuvico CT-2M-MP20FH, Инструкция по эксплуатации

Страница: 19 / 40

19
Select
“
MOTION SETUP
” and push the
displays.
to the left or right. Then the MOTION setup
Set SENSITIVITY 00 ~ 20
Set RESOLUTION 01 ~ 04
Set POSITION ALL, CENTER
Set DELAY 00 ~ 05 seconds
Set OUTPUT OFF, OUT1, OUT2
Set HOLD TIME 03 ~ 99 seconds
Select
“
AE SETUP
” and push the
to the left or right. Then the AE setup displays.
Refer to the AE SETUP in the camera setup.
6. Set
“
DWELL time
”. (03 ~ 99 seconds)
7. To select the next page of Presets, scroll the page by pushing the
the first or last columns of the menu.
8. Repeat step 2 through 7 for each additional Preset position.
to the left or right on
9. Select
“
SAVE AND EXIT
” and push the
to the right or press the key. Press
the or IRIS Close key to exit the program without saving.
NOTE: Press the HOME key at programmed Preset position (
*
) to delete a programmed
Preset view.
The position, which is marked with the
*
, already has the Preset view assigned. Press the
key on the
*
to review the stored Preset. The camera will show the stored Preset scene.
Hold down the key while selecting the desired scene using the Joystick . Current position
will be displayed. Release the key to complete. Or press the IRIS Open key then the
“CONTROL” displays. Move the desired position and the zoom position. Press the
key
then the
“CONTROL” disappears. Select “EXIT” and push the
to the right.
PRESET AREA SETUP
(CTRL KEY)
NUMBER 001
PAN
TILT
000.0 000.0
EXIT(ESC TO EXIT)
MOTION SETUP
SENSITIVITY: 10
RESOLUTION : 02
POSITION
: ALL
DELAY : 00 SEC
OUTPUT : OFF
HOLD TIME : 03 SEC
EXIT(ESC TO EXIT)
Joystick
Joystick
Joystick
Joystick
ESC
IRIS Open
PRST
CTRL
CTRL
IRIS Close
Joystick