Nuvico CT-2M-MP20FH, Инструкция по эксплуатации

Страница: 16 / 40

16
CTRL
3.4 Auto Scan
(Shortcut: SCAN )
The Auto Scan supports up to 17 programmed angles at user-programmable speeds.
Follow these steps to program Auto Scan:
NUMBER 01 ~ 08, 10 ~ 17, 09 : AUTO-PAN mode.
TITLE up to 6 characters
MODE NORMAL, VECTOR, RANDOM (AUTO-PAN mode: NORMAL, RANDOM only).
NORMAL Move from start point to end point in panning only
VECTOR Move from start point to end point including tilt and zoom simultaneously and
linearly.
RANDOM Move randomly between the start point and the end point
SPEED 1 ~ 13 step, the lower number means the slower speed.
SCAN DIR Set the Scan direction, CCW (Counter Clock Wise), CW (Clock Wise).
SWAP Swaps the start point for the end point.
DWELL Set the dwell time at the both end, 01 ~ 99 seconds.
1. Press the key to enter the Auto Scan menu directly. Or press the MENU key to display
the main menu on the monitor. Scroll to Auto Scan and push the Joystick to the right.
2. Select
“
NUMBER
” and set the desired number by pushing the
to the left or right.
3. Select
“
TITLE
” and twist the
to enter the title edit mode.
4. Twist the
pushing t
or
to change the alphanumeric characters and move the next position by to
the left or right. Or move down to the character table and press the key
at the desired character then the cursor position moves to the next
position automatically. Push the Joystick to the left or right at the
“ALL DELETE” field to delete
all characters. Push the Joystick to the left or right at the
“EXIT” field to finish title edit menu.
TITLE EDIT MENU
(CTRL KEY)
A01
*
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
ALL DELETE
EXIT(ESC TO EXIT)
AUTO SCAN
NUMBER :
TITLE :
MODE :
SPEED :
START ANGLE :
END ANGLE :
SCAN DIR :
SWAP :
DWELL :
SAVE AND EXIT(ESC
SETUP
01
A01
NORMAL
5 STEP
----- -----
----- -----
CCW
OFF
03 SEC
TO CANCEL)
SCAN
Joystick
Joystick
Joystick
he
Joystick
IRIS Open