12
ROTOR TYPE
DISPLAY
MAXIMUM
SPEED
(RPM)
MAXIMUM
SPEED
(RCF)
RA 280 Swing Out
S out
4,100
3,082
MP 200 Swing Out
PLAtE
4,100
2,349
RS 600 Angle
6 50
9,000
8,965
RS 100 Angle
10 10
12,000
14,167
RS 24 Angle
24 1.5
14,000
18,406
Angle Rotor Swing-out Rotor
NOTE :
The correct rotor type should be selected in order to see the correct RCF values
during the run.
Push the function key (16) and see that the RPM or RCF option on the speed display (1)
flashes. Choose the RPM or RCF option by pushing value increase and value decrease keys
(15).
Push the function key (16) and see that the value on the speed display (1) flashes. Enter the
run speed or RCF by pushing value increase and value decrease keys (15).
Push the function key (16) and see that the value on the time display (2) flashes. Enter the run
time by pushing the value increase and decrease keys (16). (H means hold position)
Push the function key (16) and see that the acceleration led turns on and the value on the
temperature display (3) flashes. Choose the acceleration value among 0,1,2,3,4,5,6,7,8 or 9 by
pushing the value increase and decrease keys (15).
(0: slowest 10: fastest rates)
Push the function key (16) and see that the break led turns on and the value on the
acc/break/temperature display (3) flashes. Choose the break value among 0,1,2,3,4,5,6,7,8 or
9 by pushing value increase and decrease keys.(0: slowest 9: fastest rates)
Push the function button (16) and see that the cooling indicator led (17) turns on and the value
on the acc/break/temperature display (3) flashes. Enter the bowl temperature value. (This step
is not valid for NF 800 model.)
Push the function key (16), the entered values will be saved.
You may make 10 (0-9) different programs.
