Pro H2O Alarm Moisture Analyzer
NUVAIR
Page
5
www.nuvair.com
2.0 System Description
The Pro H
2
O
TM
Moisture Analyzer measures water (H
2
O) levels in gases in the range of 0 to
1999 parts per million (ppm). It can be used to measure the water content in gas mixes that will
increase with humidity and moisture saturation of filters. The Analyzer is designed to verify H
2
O
concentration in stored gas cylinders as well as to monitor continuous gas flow from a
compressor. The Analyzer is a water and impact resistant unit compatible with outdoor and
marine environments.
As soon as the analyzer alarm is tripped shut down your compressor system
and replace all of your filter cartridges in the compressor system.
The Analyzer is battery powered and includes an
internally mounted Sensor with audible alarm. The
Water-Resistant Case includes a Digital Display and
controls that are environmentally sealed
The Analyzer uses a Flow Adapter Cap and Flexible
tubing to deliver sample gas to the Sensor.
Pressurized gases must be regulated to avoid damage
to the analyzer. Use of this Analyzer in a hyperbaric
chamber will void the owner’s warranty.
The Analyzer comes in a high impact storage case. It
is ready for use after calibration with an appropriate
certified calibration gas.
This analyzer is designed for use at atmospheric pressures only. It is not designed for
exposures in a hyperbaric chamber. Use of this analyzer in a hyperbaric chamber will
result in incorrect readings and may damage the unit.
Although the Analyzer is a rugged instrument, careless handling or abuse may result in
damage to the Analyzer resulting in inaccurate gas analysis. Inaccurate gas analysis can
lead to serious personal injury or death.
Extreme H2O exposure levels directed at the Analyzer sensor may damage the sensor.
Flow
Adapter Cap
Over Sensor
Face
Water-
Resistant
Case
