Pro H2O Alarm Moisture Analyzer
NUVAIR
Page
6
www.nuvair.com
2.1. Controls
2.2. Display
2.3. Alarm
The Analyzer includes an audible alarm that is activated when the Sensor reaches user
programmed level. The alarm will not clear until the concentration of Moisture drops below user
programmed level.
As soon as the analyzer alarm is tripped shut down your compressor system
and replace all of your filter cartridges in the compressor system.
2.4. Sensor
The Analyzer uses a Capacitive H
2
O Sensor to measure moisture content in gases. The
Sensor is disposable and user-replaceable, with a life expectancy of 60 months plus depending
on usage. The Sensor is designed for use at atmospheric pressure (0 P.S.I.). The gas mixture
to be analyzed must be regulated accordingly, and any potential for pressure or vacuum must
be avoided.
2.5. Batteries
One 9-volt battery provides power. The battery is located inside the Analyzer and is user-
replaceable. The battery should be removed any time the
Analyzer will be stored without use for extended periods of time.
Screen will blink alternately from “000” to “bAt” at start up when
battery is low.
Digital
Display
On/Off Button
Low Battery
Indication
Adjust Button
Relay
Output
Program Button
Moisture Reading
0 – 1999 ppm
In 1 ppm
increments
Moisture Reading
0 – 100%
In .1 % increments
