Intelligent Surveillance Solution
2. Playback
page-
29
Missing Object:
Alarm is set off when the selected
object is removed from the defined area on the screen.
Define detection zone:
Before detecting missing object,
it is required to define a detection zone. Left click and
drag to draw a detection zone. Alarm will be triggered
when the defined object is removed from the
detection zone.
Sensitivity:
Modify the sensitivity setting by changing the
slider control. Move toward right will increase the
sensitivity level and a relatively small movement will
trigger the alarm; in contrast, move the slider control
toward left will reduce the sensitivity for movement
detection.
Interval:
Click and move the slider control to the right to increase time
interval so that the alarm will only be triggered when the movement lasts
longer. Move to the left to reduce the time interval.
2.6.4 Unusual Event-Lose Focus/ Camera Occlusion
Lose Focus:
System will inform you when the camera(s) lose its focus.
Camera Occlusion:
Alarms when any of the cameras is blocked.
2
2
.
.
7
7
E
E
n
n
h
h
a
a
n
n
c
c
e
e
m
m
e
e
n
n
t
t
2.7.1 General Setting:
Check the option and chose
whether you want to apply the setting to all the channels
or only to those currently shown on the screen.
2.7.2 Filter Setting
Visibility:
Check the option and adjust the gamma
value of the image to enhance the image and
make it cleaner.
Sharpen:
Check the option to activate the function.
Move the slider control to the right to sharpen the image, to the left
