Operating Instruction and Documentation
UNI-LIFT 4000
- 48 -
Grease all lubricate nipples with a multipurpose lipid. (example: Auto
Top 2000 LTD. Agip).
min. once in a year
Clean and check the condition and function of the photo electric and
reflector.
min. once in a year
Check the condition and function of the safety devices (CE-STOP +
warning signal, photo electric, roll over safety device etc.)
min. once in a year
Clean and check condition and function of the ratchets also the
pneumatic cylinder. Grease the surface with a multipurpose lipid.
min. once in a year
Check the function of CE-Stop + acoustic warn signal.
min. once in a year
Check all welded joints for cracks on the automotive-lift.
If any cracks are found on the lift cease use immediately. Switch-off
and secure the main switch (lock) and call the service partner.
min. once in a year
Check all surfaces and repair if necessary.
Damage to external surfaces, must be immediately repaired.
If theses repairs are not made immediately, permanent damage to
the powder-coated surface may result.
Repair and clean damaged areas with an abrasive paper (grain 120).
After this is complete, use a suitable paint (observe the RAL
Number).
min. once in a year
Check the zinc surface and repair it with a suitable tool. Use
abrasive paper (grain 280).
White rust can result from moisture laying in certain areas for long
periods of time. Poor aerating can also result in rust formation.
Rust may result from mechanical damage, wear, aggressive
sediments (de-icing salt, liquids) or insufficient cleaning.
Repair and clean these areas with abrasive paper (grain 280).
After this is complete, use a suitable paint (observe the RAL
Number).
min. once in a year
The hydraulic oil has to be changed at least once a year. To change
the oil, lower the lift into its lowest position. Empty the tank and refill
with clean oil, approx. (see chapter 3.) per hydraulic unit are needed.
Use an ATF-Suffix hydraulic-oil (OEST Company ) if the ambient
temperature is under 5 degrees centigrade. After filling, the hydraulic
oil must be between the upper and lower markings of the oil level
gauge. Remove the old oil according to the appropriate regulations.
min. once in 2
years
Check the condition of the hydraulic tubes and fittings for leakage.
min. once in a year
Durability of the hydraulic hoses:
The use duration of the hose lines should not exceed six years,
including a storage time of at most two years.
Check that all screws and bolts are correctly torque (turning
moments, see the list)
min. once in a year
Содержание UNI-LIFT 4000 MB
