Nussbaum UNI-LIFT 3200 NT Plus ND, Инструкция по эксплуатации и документация

Страница: 10 / 54

Operating Instruction and Documentation
UNI-LIFT 3500 NT ND/ UNI-LIFT 3200 NT Plus ND
- 10 -
3. Technical Information
3.1 Technical data
Capacity without wheel free lift 3500 kg
with wheel free lift 3200 kg
Load distribution 2:1 in or against the drive on direction
Lifting time approx. 30 sec. with max. load
Lowering time approx. 30 sec. with max. load
Wheel free lift 2500 kg
Load distribution 2:3 in or against the drive on direction
Lifting time approx. 8 sec. with max. load
Lowering time approx. 12 sec. with max. load
Line Volthage 3 x 400 Volt , 50Hz
Power rating 3 kW (992856)
Motor rotation 2880 rotation/min
Pump capacity 2,7 cm³ (1BK74,2S)
Hydraulic pressure approx. 320 bar
Pressure control valve approx. 360 bar
Oil Tank: approx. 10 Litre
Sound level:
≤
75 dB(A)
Connection by customer 3~/N+PE, 400V, 50 Hz
fuse 16 Ampere (time-lag fuse)
observe your regulations of your country
3.2 Safety devices
1. Pressure relief valve
Overprint-safety of the hydraulic system
2. Holding valve
safety device against unintentional lowering
3. Lockable main switch
safety device against unauthorised operation
4. Two independent cylinders (each side master- and slave-cylinder)
safety device against unintentional lowering
5. CE-STOP + acoustic signal (min. 120 mm over the danger point)
safety device against squeeze
6. >Totmann< control
When you release the button, the actual motion of the lift stops